5 Nov
2018
5 Nov
'18
9:24 p.m.
On 11/04/2018 08:10 AM, Rob Jarratt via cctech wrote:
Rob, you need to have the drawing for the PRO-350, and read it.? Reset
on the F11 chipset is generally part of
Pwr-OK? and if reset is bouncing likely power is NOT ok.?
FYI the 7201 is MPSC a dual multiprotocol serial chip not unlike the
Z80-SIO.? Likely the system wide reset
is coming from the power OK generation as you seeing hardware reset into
the MPSC.
Hint: the pro350 is basically an 11/23 in a different form factor.
Allison
-----Original
Message-----
From: Tony Duell [mailto:ard.p850ug1 at gmail.com]
Sent: 04 November 2018 12:42
To: rob at jarratt.me.uk; Jarratt RMA <robert.jarratt at ntlworld.com>; General
Discussion: On-Topic and Off-Topic Posts <cctalk at classiccmp.org>
Subject: Re: Datasheet for a NEC Chip in DEC Professional 350
On Sun, Nov 4, 2018 at 12:37 PM Rob Jarratt via cctalk
<cctalk at classiccmp.org> wrote:
I have been trying to
find what is driving this path in the logic and this chip was the only one I for which I
couldn't identify the pins, but it seems that from this datasheet
(https://datasheet4u.com/datasheet-pdf-file/1098405/NEC/UPD7201/1) they are all inputs and
not outputs. So I need to look again for an output pin that is driving this signal.
Thanks
Rob
I have posted previously about a DEC Pro 350 I am
trying to get
working again. At the moment it seems to be constantly resetting the CPU.
I have traced one possible path for the cause of this back to a NEC
chip for which I cannot find a datasheet. It is a 40-pin DIP it is
marked "NEC Japan
8239K6 D7201C". All I have been able to find is more modern USB host
controllers.
Almost certainly a uPD7201 multi-protocol (asynchronous and
synchronous)
serial chip. I have an NEC data book with it in if all else fails but a google
search for 'uPD7201 datasheet' (no quotes) found sites with the data sheet
to download as a .pdf file.
Quite why that should reset the machine is beyond me....