DEC quad board rack

Thanks, that information should be enough to get going. I may want a different lay out so that it will fit on some metal shelving I have. ?Mike Zahorik (414) 254-6768 From: Noel Chiappa via cctalk <cctalk at classiccmp.org> To: cctalk at classiccmp.org Cc: jnc at mercury.lcs.mit.edu Sent: Monday, January 1, 2018 12:59 PM Subject: Re: DEC quad board rack ? ? > From: Michael Zahorik ? ? > Thanks for responding. Sure. Not sure how much use it was, but... ? ? > I do like your wood working. Thanks.. ? ? >? may give it a try. Should not be very difficult. No, as long as you have either a radial arm saw (best), or a table saw (preferably with a 'sled' - if you don't have one, probably worth making one) to cut all the slots. Like I said, if you want a drawing, let me know. A few data bits: the slot pitch (slot center to slot center distance) is 5/8"; I used 1/8" for the depth of the bottom slot (just enough to hold it in place), and 3/16" for the top (some extra, to allow for board size variation). The shelf-shelf spacing (i.e. bottom of one, to the top of the next) is 10-1/4" (i.e. the repeat distance is 11", when using 3/4" boards). ? ? Noel