17 Nov
2020
17 Nov
'20
3:27 p.m.
On 11/17/20 5:05 PM, Paul Koning via cctalk wrote:
As long as you can live with the collisions. Network would still
function but efficiency would be lower as number of collisions went
up. And they would. The proper way to mix 10Base5 and 10Base2
was with a 10Base2 hub connected to the yellow cable with a transceiver.
As for transceiver placement, those black marks were there for a reason.
:-)
bill
On Nov 17, 2020, at 4:57 PM, Chuck Guzis via
cctalk <cctalk at classiccmp.org> wrote:
On 11/17/20 1:03 PM, Bill Gunshannon via cctalk wrote:
That's true for either kind. Also remember to put the terminators only at the ends.
I've seen magazine articles showing a terminator in the middle (on a T connector)!
BTW, you can mix the two, just connect the sections with a BNC to N barrel. Use the
10Base2 limits in that case.
The measuring stuff only really matters for large installations. If you're using
thickwire with 20 stations or 100 meters or small configs like that, don't worry about
it.
Agony? Considering the alternatives to compare
it to at the time
not really much agony.
(Sorry for the blank response, but my email client has moved the buttons!)
At any rate, I'll take 10Base2 over 10Base5 any day. Lots of BNC
fittings I find to be preferable to "vampire taps" and tape measures.
Just remember the terminators.