3 Nov
1998
3 Nov
'98
3:43 p.m.
Hi Allison:
I have an 11/03L carcass and am hoping to use the backplane for a set of
11/73 boards I've acquired for a friend.
I need info on the power supply, hopefully a print set, or in the least
some info on the pinout of the 10 conductor ribbon cable that runs from the
supply to the front panel. My machine has _no_ front panel!
I want to determine which lines are the (presumably) DC OK, HALT, RESTART,
etc, so that I can install the 11/73 gear and control the system.
Secondly, the +12 VDC line from the supply is sitting at 9.5V, no load.
There may be a problem, I can fix it but the print set would be most helpful.
Hope you can help,
Kevin
At 10:04 PM 98/11/03 -0500, you wrote:
< If you have one of these machines, I have a
question! Please email me o
< reply to the newsgroup!
<
< Thanks in advance,
<
< Kevin
< mcquiggi(a)sfu.ca
I still have an 11/03 and various parts what the problem?
Allison
---
Kevin McQuiggin VE7ZD
mcquiggi(a)sfu.ca