3 Dec
2018
3 Dec
'18
7:33 p.m.
Very Nice collection!? ? Yes? have to love that? laptop. Did not know? SUN made one. or?
I? guess a third? party? put the? Sun? goodies in a case of their? design?? either way?
?NEAT!
?
Seeing? ?a? nice? run? of? systems like this in wonderful condition? is? great!
?
?
Ed#
?
In a message dated 12/2/2018 5:49:49 PM US Mountain Standard Time, cctalk at
classiccmp.org writes:
?
I will have to get back with you on the audio. It is on offline backup
media and I need to find it.
Here is a link to some photos of the exhibit -
https://photos.app.goo.gl/7qC8UbEYCeCf9CBo7
The RDI Britelite (laptop) is a SPARCstation IPX system board in a
laptop chassis. It was in the Day 1 exhibit, but not the Day 2 exhibit
because the power adapter died on the morning of the second day.
One of the photos is an opened-up SPARCstation LX, which is very similar
on the inside to your IPC.
My exhibit next year will be on early 90s SPARC clones.
alan
On 12/2/18 1:43 PM, ED SHARPE via cctalk wrote:
Alan...? ?would? ?love? a? copy? of? the? audio? for?
our? archives? here.
Would? like to? see pix? of? your? display too? sounds? neat!
Any? other? ?files? text? or? otherwise? welcome? also? ?to? this? address? ?or? drop? us
a? ?dropbox? link
The? Sun? workstations? I? never? knew too much? about as? at the time? ?did not? seems?
like? old? history? nor? did? we? use any? so playing catchup!
Thanks in? advance...
Ed#
In a message dated 12/2/2018 12:44:32 PM US Mountain Standard Time, cctalk at
classiccmp.org writes:
There is only room for drives in the top half of the chassis.? The PSU
and an assembly that holds the drives fills the top half. A 3.5"
half-height drive fits in one side of the assembly and a 3.5" floppy
drive fits in the other. The PSU cables go from the rear to the front of
that side of the chassis, below the FDD (when the chassis is closed).
I did an exhibit on Sun lunchbox systems, including the IPC (4/40), for
PNW VCF earlier this year. I looked for press kits, posters, etc. to use
in the exhibit, but could only find text files. I know people who worked
at Sun on the development of those early SPARCstations and none of them
had any of that kind of material.
I had an audio cassette "Introducing the IPC" for Sun sales. I donated
it to CHM this year (but I ripped the audio before I sent it to them).
alan
On 12/2/18 10:13 AM, ED SHARPE via cctalk wrote:
> Thanks? for the? info? to? get it? open!? when? back at the? office? ?shall? ?do
that..? ?there? may? be? drives in 2 places -? on board and? the off board? one. Always
interesting to? explore? something? ?one? has? only? read? about!
>
>
>
> Along the? ?same? line? of? UNIX? ?stuff? ?we? have a? COBALT? ?1U Pretty? blue?
sever and a? COBALT? CUBE.? I? do remember? ?lusting? after? one of these? ?1U? COBALT?
servers when they? were? current didn't? have anything in? the? budget? back then?
though? for? one.? I? have? been? told? SUN? eventually ended up? owning COBALT.
>
> As? will all that? ?we? ? have? we? are? looking? for? any? ad slicks? ?press kits? ?
posters,? wild artwork? ?for? the? Sun $/40,? ? and the? 2? COBALT? machines..
>
> Ed Sharpe archivist? for SMECC? www.smecc.org
>
>
>
>
> In a message dated 12/1/2018 8:15:39 PM US Mountain Standard Time, aperry at
snowmoose.com writes:
>
>
> Yes. It is next to floppy in the upper half of the chassis. There is a 50-pin (IDC
connectors) ribbon cable that goes down to system board at the bottom of the lower half of
the chassis. The chassis splits in the vertical middle in a, if looking at the chassis,
fairly obvious place. Because of the cables that run from the top to bottom, it
effectively hinges at the front of the chassis. There a couple buttons on the side to
release and sometimes a security cable bit to remove (phillips screw).
>
> On 12/1/18 7:08 PM, ED SHARPE wrote:
> Hi? Alan - The? hard drive is same? size cabinet....? ? with? I? guess a? SCSSI?
?cable.? I? will have? to? look? at? it? ?further...? ?wonder if starting it? out on? a?
variac? ?would? help the capacitors? like? I? do? with the old radio sets? here in the
museum? ed#
>
>
> In a message dated 12/1/2018 8:04:03 PM US Mountain Standard Time,
> aperry at snowmoose.com writes:
>
> Well, as I said, in my experience, the NVRAMs that you can buy new from Mouser work
good enough. And the mod to the original battery isn't that hard to make.
>
> In my experience with IPCs, the bigger problem is the power supplies. If the PS on
the IPC that you have now doesn't need to be re'capped now, it will need it soon.
After that will likely be the HDD that needs work. Almost all of my HDDs that originally
shipped with lunchbox systems up to the 424 meg (ST1480N) have died. The price for working
50-pin SCSI HDDs are at a point that SD2SCSI parts make more sense (unless you want to
exhibit them as they originally ran).
>
> alan
>
> On 12/1/18 6:55 PM, ED SHARPE wrote:
> BUMMER
> It may become a static? display.....
>
> Ed#
>
>
> In a message dated 12/1/2018 7:53:44 PM US Mountain Standard Time,
> cctalk at classiccmp.org writes:
>
> A 4/40 is a SPARCstation IPC. It used a M48T02 NVRAM for the IDPROM.
>
> Yes, one with the dreaded battery.
>
> alan
>
> On 12/1/18 5:04 PM, Ed via cctalk wrote:
>> we were given this and a hard dribe a floor standimg decwriter..... does this use
NV ram with dreaded battery? thanks,ed
>>
>> Sent from AOL Mobile Mail