17 Jul
2003
17 Jul
'03
10:48 a.m.
On 2003.07.14 02:50 owen(a)bardstown.com wrote:
I have no video adapter or monitor, can someone tell
me the type
(guessing Sun 13W3...)
I.e. the machine has a framebuffer but you have no cable?
You can use a Sun 13W3 to BNC cable if you only use the R G B BNC plugs.
The other 10 pins of a 13W3 connector are different used on Sun and IBM.
Also, can someone provide instructions on how to use
this with the
Linux term. program Minicom?
What is the problem? Null modem cable, start
minicom(1), done.
AFAIK you need the diagnistics software or AIX to switch the machine to
serial console. I prefer to use cu(1) or tip(1) instead of minicom(1).
Less trouble with terminal emulation and more minimalistic. ;-)
And... *grimaces* anyone know HTH to get the cover off
;)
Pull down the latch on the back and pull the entire machine out of the
cover. At least it works this way on my 250 and I think the 220 and 250
are very similar. Ahh, the lock on the front has to be in service
position.
--
tsch??,
Jochen
Homepage: http://www.unixag-kl.fh-kl.de/~jkunz/