11 Feb
2009
11 Feb
'09
2:42 a.m.
On Feb 11, 2009, at 2:30 AM, tiggerlasv at aim.com wrote:
Sorry about that -- I no sooner hit "send",
when I realized that I
transposed
numbers on the Fujitsu model number.
I don't know how close the model numbers are;
perhaps you can extrapolate the sector settings
based on the 2321 info. . .
I kinda doubt it. Thanks anyway though.
I spent most of the night digging through boxes to find a set of
SMD cables, which I did finally find. (only one set though) Next
I'll see if I can determine the specific parameters that I require,
and then perhaps Tony can get me the matching switch settings from
his paper copy of the manual.
I'm going to try exercising and formatting the drives on an Emulex
QD33 in a small Qbus machine, as I know I have working hardware and
configuring a QD33 is a lot easier than an SC72. Then, when I'm
confident that the drives are ok, I'll move them to the 11/70 and
connect them to the SC72.
I was sure that I had an M2312 manual here somewhere, but an hour
of looking through boxes for that instead turned up a manual for an
M2284. Sigh.
If only I had an M2284 drive. I really like that model.
-Dave
--
Dave McGuire
Port Charlotte, FL