12 Jun
2003
12 Jun
'03
3:59 p.m.
chris wrote:
The generic manual included with a J2591A states that to reset the print
server, hold down the test button while connecting the power cord.
To print a configuration page, connect a printer and press the test
button. Telnet to the IP on the config page and setup the print server.
Martin
I don't
have the manual, but I thought you had to hold the
TEST button down for ten seconds while powering up the
device.
I've tried a number of different lengths of time in holding the test
button. Its possible that it is in fact resetting, but I see no visual
indication of it, so I can't tell.
If it is resetting, it still isn't taking a BootP assigned IP, and is
erroring out when I connect it to the network. If it was one unit, I
would assume its broken... but two units doing the exact same thing, I
think I am doing something wrong, and I hope a manual may tell me what
that is.