You're probably right. I built a H19 (terminal only model). I can't
honestly remember if the terminal board was assembled or not. I'm pretty
sure the drive electronics board was un-assembled.
Yes. I guess what you cal lthe 'drive electronics board' is what I called
the 'monitor PCB' -- the one flat i nthe bottom of the case thqt contains
the defleciton circuitry, etc. I am pretty sure that di come as a bare
PCB, and that the logic board, the one with the Z80, etc, on it, came
ready-built and tested
I have a Z90, ehivh id muvh the same machine as the h89, except that it
came compleletelyu assembled and had exra options installed at the
factory. Some of the docs I have really apply to the kit version, but of
course the scheamtics, etc, are the same.
The most
disappointing heathkit I ever built was after the Zenith
acquisition. The only
board that was soldered was a 2" square board that
created a pattern generator for alignment. Even the cables were hecho en
Mexico. I think it took a whopping 2 hours to build, and that's a generous
estimate
I am told that toewards the end of the Heathkit era, they started selling
computer 'kits' which rwere reall what is now called 'building a PC'.
That is, screw the motherboard i nteh case, screw the PSU in, screw the
drives in, plug in the cables. No soldering at all. And worse, no
schematics (at least wit hthe H19, H89, etc you did get schematis of the
pre-built boards).
-tony