18 Feb
2022
18 Feb
'22
2:42 p.m.
I found a 400V part on Mouser and ordered that.
-----Original Message-----
From: Jonathan Chapman <lists at glitchwrks.com>
Sent: 18 February 2022 21:23
To: rob at jarratt.me.uk; Rob Jarratt <robert.jarratt at ntlworld.com>; General
Discussion: On-Topic and Off-Topic Posts <cctalk at classiccmp.org>
Subject: RE: Testing H745 Regulators
I always forget that the VAC is the RMS and not
the peak-to-peak. I
will look for a minimum rating of 100V.
600V bridge modules are often more cost effective, and more likely to be in
stock. That's why I went with the Vishay part I used.
If you can't find what you need due to shortages, you can also use a Faston
tab rectifier and solder wire legs to it.
Thanks,
Jonathan