ASR-33 Local Mode "OK"

Yipee. So after only two steps in the "clutch trip area" adjustment pages I've restored "normal" operation to the reader. Per the manual I loosened the armature extender, rotated the typing unit to the "stop position" and adjusted the extender for the correct distance (page 7, adjustment RRA-2) and once complete the reader returned to normal function. The bulk of the problem was, as Tony surmised, that the arm was now too far forward which did not allow the linkage to "catch" when the reader was turned off. Once adjusted the reader starts and stops under switch control. Now to hook this puppy up to the 8/E and see what I can make it do! (acutally eventually I'll get to the point where I read in FOCAL-8 but for now the TTY test loop would be just peachy thankyou very much. --Chuck