PDP-11/04-34 Programmer's Console manual error

So, something I just found out the hard way, while debugging another 'situation' with a PDP-11/04: The KY11-LB Programmer's Console maintainence manual contains a major error, in describing the configuration of the 20-conductor flat cable that connectors the front panel and the UNIBUS interface module (M7859). This is covered in Chapter 9, "Installation", which includes two figures, Figures 9-4 and 9-5. Those figures show the 20-conductor flat cable with the red edge stripe toward the outer edge of the front panel PCB (correct), and also toward the outer edge of the M7859 (WRONG). On the M7859, the red stripe edge needs to be oriented _away_ from the outer edge of the board. If it is plugged in as shown in these figures, the machine will not operate: the four 'RUN/SR DISP/BUS ERR/MAINT' lights will be on, but nothing else, and it will not respond to any keys. Fortunately, plugging the cable in reversed does not damage anything; simply reverse the cable. Noel