-----Original Message-----
From: Nico de Jong
Well, that does not really help very much, as a
track-by-track dump does not take the niceties of CP/M into
account, such as directory structure and where the various
segments are written. As you speak about 8" disks, we also
have to take the segment size (often 256 or 512, on some
formats 1024) into account.
Eeek.
My reasons for suggesting doing a track dump is so we can leave figuring
out the filesystem later... Which from my experience of other systems
means it is less likely we would get it wrong "on the day". It is bad
enough getting this done once, twice would not be too fun either. ;)
But of course, CP/M is not exactly part of my previous experiences.
A "photocopy" of a disk is possible using
(MS)DOS, if you can
find a MicroSolutions Compaticard IV (I have one, and no, I
dont want to part with it).
This card works very well; I once generated a bootable MS-DOS
3.1 (or 3.20?) 8"
floppy.
Nice.
The only (in my opinion) good solution, is software
reading
the CP/M (or
whatever) disk, and decode the filestructure etc., so you can
write a nice, continuous file.
Absolutely, my only concern was getting that wrong. But perhaps it is
far simpler operation to work out the file system with CP/M than getting
a track dump the disk, in which case this method is probably more
appropriate.
Of course one reason (off topic!) to dump the whole disk (down to the
flux-transition level) is to ensure you get absolutely everything on the
disk. But of course, this is only really useful for retail software that
might have applied copy protection - not really applicable for a
developers old development system! :)
Thanks!
Kieron
============================
Pareto Investment Management Limited is a Mellon Financial Company. Pareto Investment
Management Limited is authorised and regulated by the Financial Services Authority (Firm
Ref. No. 416024), and registered in England and Wales with Number 03169281. Registered
Office: Mellon Financial Centre, 160 Queen Victoria Street, London EC4V 4LA, United
Kingdom. Pareto is the registered trademark of Pareto Investment Management Limited. This
message may contain confidential and privileged information and is intended solely for the
use of the named addressee. Access, copying or re-use of the e-mail or any information
contained therein by any other person is not authorised. If you are not the intended
recipient please notify us immediately by returning the e-mail to the originator and then
immediately delete this message.