12 Jan
2007
12 Jan
'07
7:09 p.m.
Jerry wrote...
All of this HP 1000 talk got me going on mine.
Good. Mission Accomplished :)
Does anyone have a stash of these.
Yes.
I have no cables and
cant seem to find anyone that does. It seems that most
of these are offered with out the cables. I would guess they
all go to bulhead connectors and are just easier to slip off the
connector on the cards.
(on HP) No, I've never run into any cabinet bulkhead
connectors except for
DB25 panels (well, ok, some of the 13037 stuff). Everything else was direct
cable from device to interface. On a properly buttoned up HP it wouldn't be
easier to slip them off the cards, what with ground cables sometimes screwed
in and the PCA retainer bracket locked in and the rear panel over the I/O
cards for proper ventilation and the battery backup over that ;. That's not
to say everyone observed those recomendations of course.
- Console 12966a
I don't have a spare, I
make more anytime I need one from spare connector
hoods. The jumpers in the hood for wiring to a BACI are a pain.
- HPIB disk 12821a
I may have a spare, what
length do you need.
- HPIB Mag tape 13183
Hummm I don't have
manuals in hand, but I don't believe 13183 is a HPIB card
is it? Isn't that the "normal" HP proprietary interface?
Also Trying to figure out 2 cards
HP 12250 60001 and a FDS n612 4256-001
Doesn't ring a bell at all. Got
pics?
Jay