10 Mar
2003
10 Mar
'03
4:38 a.m.
No, should work with either serial (3-wire or 7-wire null-modem cable) or
parallel (bidirectional cable). However, for intersvr /rcopy, if you are
using any port other than COM1 on the _destination_ computer, make sure you
are _not_ running SHARE on that computer.
-----Original Message-----
From: Chad Fernandez [mailto:fernande@internet1.net]
Sent: Monday, March 10, 2003 9:06 AM
To: cctalk(a)classiccmp.org
Subject: Re: Interlnk (was RE: New bounties ($$$) )
Feldman, Robert wrote:
Correct.
On the _client_ computer, add the following line to CONFIG.SYS:
device=c:\dos\interlnk.exe
(if interlnkexe is in C:\Dos, of course!).
On the _server_ computer, at the command prompt, type:
intersvr<cr>
Intersvr can also pump the needed files to a second computer using:
intersvr /rcopy<cr>
Doesn't that have a restriction of being only with a serial connection?
I don't think that works with parallel.
Chad Fernandez
Michigan, USA