14 Dec
2018
14 Dec
'18
12:21 p.m.
On Tue, Oct 16, 2018 at 4:29 PM Guy Dunphy via cctalk
<cctalk at classiccmp.org> wrote:
Update:
I've received good clear photos of the roller pairs, from which I can work out a
sufficiently accurate
diameter for the pinch roller. Thanks David and Ed.
My guess of 27.5 WAS quite a bit off. Preliminary working from the photo gives a roller
Dia of 27.2 mm,
ie only just touching. But that was done late at night, and from only one measurement.
I'll post a more detailed result later today.
I have what appears to be a firm and intact upper 2nd roller on my
M600 (it's the other one that's turning to goo)
I measured the roller to be:
O.D. (rubber) 26.6mm (~1.048")
hub O.D. (metal) ~13.9mm (~0.55")
I.D. (metal) ~6.4mm (fits 1/4 D-shaft)
width ~9.5 (0.375 - seems to be 3/8")
...in case it's possible to find a standard roller. The shaft
diameter and roller width are certainly common Imperial values.
-ethan
It's possible the roller is a standard