13 Jun
2006
13 Jun
'06
6:33 a.m.
> Tony Duell wrote:
> > Personally, I'd want to use a metal gear that was a sliding fit onto
the
> > motor sprindle, and then fix it on with a
suitable Loctite.
>
> I'd be tempted to file a flat section on the shaft and add a matching
flat
to
The spindle is about 1.5mm in diameter IIRC (I've not put the micrometer
on it, so don't make something based on that). Making a hole-with-flat of
that size could be 'interesting!
We don't have to guess, as I put on a previous post I measured the shaft
diameter on my 1020s with a digital micrometer and it is 0.060 " ( or 1.5 mm
for you metric folks ) on the gear in question.
Also I found some Black replacement pens ( BX4206 ) and some color ones
also. As " Curt - Atari Museum " pointed out these can still be ordered at
the URL he gave. For some reason though the black pens are okay, but all the
color ones I have crapped out ...
Best regards, Steven Canning