13 Mar
2015
13 Mar
'15
7:31 p.m.
On 2015-03-14 02:51, Jon Elson wrote:
On 03/13/2015 11:34 AM, Noel Chiappa wrote:
There definitely exist PROM programmers with serial interface, even if
none are made any longer.
If anyone happen to have, or stumble on a PKW-1000, I wrote a program
for RSX-11M-PLUS to use it from there.
Johnny
--
Johnny Billquist || "I'm on a bus
|| on a psychedelic trip
email: bqt at softjar.se || Reading murder books
pdp is alive! || tryin' to stay hip" - B. Idol
So, I need to add a PROM burner to my collection
of stuff, and I'd
like to ask
for recommendations.
The ability to read them would be a real plus (no idea if that's a common
capability or not).
Yes, they all need this capability, as that's how you
verify the write
got all the bits
set correctly.
I have a Logical Devices Allpro 88, with the ISA card that controls it,
if that is
of any interest to anybody. I do NOT have a copy of the software for it.
I use a Xeltek Superpro/Z, which supports most EPROMS going way back.
It supports the 2732, and may support some 16K EPROMS, too. You won't
find ANYTHING that supports 1702 devices, they needed 80 V to program.
I doubt you will find anything with a serial interface.