Well, they vary for what you may need of course, but in my case, I wanted to connect to
existing
DD11-DF female shell/male pin 15 and 6 contact connectors.
Searching the
te.com site, there are some similar parts, but the ones which look correct
are:
Commercial MATE-N-LOK-S, 1-171196-0 (digikey A106239-ND), 6-pin
CMNL PLUG HSG P/M NATL, 1-480323-0 (digikey A1427-ND), 15-pin
There are a number of pin options for these, but I picked: 170121-1 (digikey A122316-ND),
tin, 14-20 AWG
Once the parts arrive, I will confirm if I chose wisely...
--tom
On 1/27/21 10:57 AM, Guy Sotomayor via cctalk wrote:
Could you post the part numbers?
Thanks.
TTFN - Guy
On 1/27/21 7:19 AM, Tom Uban via cctalk wrote:
> Thanks much. I think I found the mating plugs I need on the
te.com site and digikey
has them.
>
> --tom
>
> On 1/27/21 2:05 AM, Mattis Lind wrote:
>>
>> Den ons 27 jan. 2021 kl 06:59 skrev Tom Uban via cctalk <cctalk at
classiccmp.org
>> <mailto:cctalk at classiccmp.org>>:
>>
>> ???? Are the power connectors on the DEC PDP-11 backplanes (e.g. DD11-DF 15pin
and 6pin) Molex or
>> ???? other?
>> ???? Are they still commonly available?
>>
>>
>> They are called Commercial Mate-n-lok.? Company is called TE-Connectivity
nowadays.
>>
>> Later on DEC used Universal Mate-n-lok. For example in the VAX-11/750.
>>
>> /Mattis
>>
>>
>> ???? --tnx
>> ???? --tom
>>