19 Feb
2020
19 Feb
'20
6:37 p.m.
On Wed, Feb 19, 2020 at 11:15 AM Ethan Dicks via cctalk <
cctalk at classiccmp.org> wrote:
On Wed, Feb 19, 2020 at 5:10 AM Chris Zach via cctalk
<cctalk at classiccmp.org> wrote:> Hm. I have the bulkhead 25 pin to 40
pin interface thing from an RX02 in
thanks Ethan...I saw this page but did not recognize that the pins were
labeled to match what's in the 278 manual. One just has to match the label
to the pin on the other end.
b
a box, I'm not using it as I am going from
the pdp11's RX01 straight to
the drive's controller. That should give you the pinout, want to borrow
it?
I already sent Bill the pinouts of both ends, but for the benefit of
the list archives, the DB25-BERG end is documented at:
http://www.pdp8online.com/pdp8docs/rx02pinout.txt
-ethan