30 Jun
2020
30 Jun
'20
8:22 a.m.
June 30, 2020 4:58 PM, "Tony Duell" <ard.p850ug1 at gmail.com> wrote:
On Tue, Jun 30, 2020 at 3:17 PM ed--- via cctalk
<cctalk at classiccmp.org> wrote:
Ah, I did not know that, interesting to know.
Ed
June 27, 2020 8:05 PM, "Noel Chiappa via
cctalk" <cctalk at classiccmp.org> wrote:
https://www.ebay.com/itm/224058116598
Noel
Looks nice, but the cover, the static filter and the 2 small flatcables with twisted
wires are
missing.
Connecting a DZ11 directly to the pcb with the connectors won't work directly as
expected.
Why not? I've linked up DZ11s to the distribution panel PCB with a
straight ribbon cable and had no problems.
The RFI filters effectively swap odd and even pins in the cable (the
pins are straight through the filter but of course you look at them
from opposite sides). That's why the short ribbon cables between the
filters and the distribution panel are not straight through but have
crossover connections.. But if you remove both the filter and the
crossover cable it will work as you expect.
-tony