Thanks for your help so far - I was able to find them at mouser:
One is easy - J3 is a 2x10 pin 2.54mm connector which
is still common today.
But it is higher than the usual connectors. It has a hight of 1.5cm. If you
search for the printed A-MP number (1-87456-6), you'll find the housing,
but not the soldered clips used inside this housing....
http://pics.pofo.de/gallery3/index.php/S8000/S8000_boards/FINCH-Adapter-Boa…
found:
Connectors:
http://www.mouser.de/Search/ProductDetail.aspx?R=87523-6
Housing:
http://www.mouser.de/Search/ProductDetail.aspx?R=1-87456-6
The next one is a power plug used on a CDC FINCH
harddisk. The manual
states, that the Connectors AMP 1-87270-1 or 3-87025-3 can be used.
I guess this where connectors used with cables - but I need a connector
which can be placed on a circuit board like this one:
http://pics.pofo.de/gallery3/index.php/S8000/S8000_boards/FINCH-Adapter-Boa…
found:
http://www.mouser.de/Search/ProductDetail.aspx?R=26-60-5100
Found too without keying pin but this is not important as I don't need one.
The thing is - the connectors in my housing on the board are kinda
simpl. The ones
at mouser seem to be kinda complex with some sort of locking mechanism
- I'm not
sure I need those, but I'm not able to find simpler ones. Maybe the
locking spring
can be removed by me before installing them in the housing? I need to
be sure that
I can remove the board from the harddisk without such a locking
mechanism preventing
me from doing so....
Connectors:
http://www.mouser.de/Search/ProductDetail.aspx?R=5-87278-1
Housing:
http://www.mouser.de/Search/ProductDetail.aspx?R=1-87270-5