A 'good-enough' H960 |d|i|g|i|t|a|l| PDP11 masthead replica

On 09/07/2015 05:00, steven at malikoff.com wrote: I've uploaded 14 pictures of the masthead to Flickr. Some of them have a ruler (metric and imperial) included so you can not only see the shape but accurate dimensions. https://www.flickr.com/photos/pnt103/sets/72157655678560535 overall width 514mm overall height 106mm overall depth 57.0mm distance from top edge to underside of mounting flange 12.7mm box section width 493mm box section/logo frame height 93.5mm box section depth 33.1mm (from the back of the flange to the front of the box, where the edge is rounded; the logo frmae extends 4.8mm beyond that, and the ) logo frame width 480mm coloured logo panel width 472mm beige border width 4.0mm (all round) box corner inside radius 9.5mm depth of recess housing the silkscreen 4.0-4.1mm (it's not quite the same in all the corners on mine). The silkscreened logo panel is a separate component, and is a tiny bit smaller - maybe 0.5mm -- I took a closeup of the bottom left corner to try to show that. hozizontal rule thickness 1.75mm (between upper and lower logo secions) width of ascenders/descenders in "d|i|g|i|t|a|l" logo 3.7mm height of "l" 23.6mm height of "d" 24.2mm (the bowl descends below the ascender) line width of boxes in "d|i|g|i|t|a|l" logo 1.75mm line width in "pdp" logo 1.0mm width of ascenders/descenders in "digital equip..." logo 1.2mm (1.18-1.21mm) height of "l" 7.3mm Note that there's a comma -- not a full stop (period) -- between "galway"and "ireland" and I'm sure that's the case for "maynard" and "massachusetts" too, although it doesn't show well in the TU10 picture. I've shown it in closeup in one of mine. -- Pete Pete Turnbull