9 Mar
2010
9 Mar
'10
2:02 p.m.
The plan for those is to drill out the holes, push in
a resistor leg=20
flush with one side, solder on one side, cut and file flush on the other=20
side, then solder that side too. I figure that should be a tight enough=20
fit that the wire won't be going anywhere... and if that doesn't work=20
there's always 26SWG tinned copper wire.
I find (stripped) wire-wrap wire to be useful for this sort of thing.
It's thin, and soldered easily.
-tony