VTServer/etc for V6 Unix

Yup, that's the standard V6 install from tape. It uses the two programs I mentioned in the last message; first mboot (which produces the '=' prompt), and then mcopy (assembled with the appropriate disk and tape drivers), which is used to copy disk images to the disk. I looked into this previously. The other three files: root.v6.tar.gz doc.v6.tar.gz usr.v6.tar.gz are just TAR dumps of the 3 disk images on the V6 distribution tape: the root (includes kernel source, and most of the binaries), usr (source for all commands), and documentation. The v6.tape seems to be an image of V6 distribution tape. Here are some notes I made a while back, when I looked at it: The first 100 512-byte tape blocks contain the tape bootstrap stuff. Blocks 100 - 4099 are the RK05 root image, blocks 4100 - 8099 are the /usr RK05 image, and the blocks 8100 - 12099 are the /doc RK05 image. .. The most recent timestamp on any file in /usr and /doc is July 19th 1975, as with Dennis' copy. However, the most recent file timestamp on root is October 11th, 1975 Block 0 on tape - mboot (tm tape booter) Block 1 on tape - hboot (ht tape booter) Block 2-xx - gubbish, apparently inodes, code, etc? Block 98 on tape - hpuboot Block 99 on tape - rpuboot Block 100 on tape - rkuboot HTH. Noel