10 Nov
1999
10 Nov
'99
12:23 p.m.
The NCR i
mentioned earlier was too heavy, 80 pounds or so, so i left it.
The apple ][ plus has, among other mods, a modification near the keyboard
and speaker. A raised board with 2 IC's and a socket, its connected to one
of the IC sockets on the main board, plus it has a 4 wire cable with connector.
For some reason this is not plugged in. Am I correct it guessing this might
be a lowercase modification, and that its unplugged to restore normal
I don't know if this is what you've got, but I remember one of the 80
column video cards for the Apple ][ had a kludge-board like that to pick
up some timing signals from the motherboard. You pulled a chip from the
motherboard, stuck it into the klugdgeboard and then pluged the
kludgeboard into the (now-empty) IC socket. The 80 column card went in an
expansion slot (slot 3 IIRC) as usual, and a ribbon cable linked it to
the kludgeboard.
operation? any idea what the correct way to plug
the connector in is? It
Where do you think it goes. The 4 pin plugs in the rear right corner of
the motherboard are video outputs (+ power lines), normally used for an
RF modulator. I would be _very_ supprised if it connected there.
-tony