Looking for tips debugging DEC TC01 controller

On Tue, Nov 30, 2021 at 1:57 PM Fritz Mueller via cctalk < cctalk at classiccmp.org> wrote: After poking at it awhile, a friend of mine pointed out that the W1 flip flop is set up so it will only toggle once, after the first "1" bit comes in from W2. This is actually pointed out in the TC01 maintenance manual but I had managed to overlook it. I'm still not entirely sure why it behaves this way (I guess so it only gates mark blocks after the first real data goes through the WINDOW register?) but it's good to know it's working properly. Tracing further through the circuitry reveals that the first SEARCH operation executed by the "Search Find All Blocks" diagnostic isn't executing properly -- it sets the GO bit momentarily and all the command bits seem to be making it to the controller, but before the drive begins forward movement "GO" goes low and after that nothing happens; the diagnostic halts after waiting for an interrupt for about 30 seconds. Regular MOVE operations appear to work fine. I've got a ton of signals to dig through so I'm not sure what's going on yet. Think I may need to get the Logic Analyzer out for this one. - Josh