13 Jan
2006
13 Jan
'06
2:39 a.m.
Hello Guy,
can you tell what type of switches those 4 are (2- or 3-position,
or momentary spring-loaded)? And which types the 6 ICs are?
- Henk, PA8PDP.
-----Original Message-----
From: cctalk-bounces at classiccmp.org
[mailto:cctalk-bounces at classiccmp.org] On Behalf Of Guy Sotomayor
Sent: vrijdag 13 januari 2006 3:24
To: PDP11 list
Cc: cctech at classiccmp.org
Subject: KM11 replica
Hi,
I just received my production version of the KM11 maintenance boards.
Once I build one and test it, boards and kits will be available.
Both will include a parts list and assembly instructions (kits will
of course include all required parts). The boards have gold edge
fingers, solder mask on both sides and a top silk screen.
Here's a link to the prototypes:
http://www.shiresoft.com/pdp-11/boards/index.html
The difference between the prototypes and the production boards is
that the prototypes were all gold plated and the production boards
just have the edge fingers. The rest of the board is tinned.
The bare board is $35 and the full kit is $85.
--
TTFN - Guy
This message and attachment(s) are intended solely for the use of the addressee and may
contain information that is privileged, confidential or otherwise exempt from disclosure
under applicable law.
If you are not the intended recipient or agent thereof responsible for delivering this
message to the intended recipient, you are hereby notified that any dissemination,
distribution, or copying of this communication is strictly prohibited.
If you have received this communication in error, please notify the sender immediately by
telephone and with a "reply" message.
Thank you for your cooperation.