26 Aug
2021
26 Aug
'21
8:37 a.m.
On 8/25/21 2:29 AM, Eric Smith via cctalk wrote:
When I worked at Apparat around 1981, we used a lot of
*male* IDC edge card
connectors. I've almost never seen any since, and I couldn't remember the
name of the vendor. I just found out that it was Kel-Am, but the internet
knows almost nothing about them.
Here's an example:
https://www.elliottelectronicsupply.com/connectors/card-edge/male-card-edge…
T
We still use a lot of KEL connectors, originally sold in the
US under the Robinson-Nugent brand, then acquired by 3M.?
Here's the right-angle board-mount connector :
https://www.digikey.com/en/products/detail/3m/P50E-068P1-SR1-EA/1802260
Here's the IDC crimp cable end.
https://www.digikey.com/en/products/detail/3m/P25E-068S-EA/1802218
I assume this is the same company.
Jon