Intellivision reset switch

Can anyone who's been inside an Intellivision confirm that there's supposed to be a little foam disc beneath the reset switch plate? I picked a system with a box of cartridges up earlier, half expecting the machine to be dead (I was figuring it was going to be a blob of easily-dead-after-so-many-years custom logic inside, but it's more like a "real computer" in nature). It *was* dead, but the [initial, at least] issue seems to be that the reset switch consists of a metal plate which is supposed to make contact with the PCB when pressed - and presumably is held away from the PCB by something when at rest. Except that there's no "something" in this machine - with the machine the right way up, the plate is free to contact the PCB, holding it in permanent reset. I'm guessing it was a blob of foam, which has deteriorated, but maybe it was a metal spring, or a piece of u-shaped plastic etc. cheers Jules