PDP 11 gear finally moved

On Tue, 21 Jul 2015, Mike Stein wrote: I dunno about that. When I've done commercial boards such as industrial process controllers and CPUs for customers with nearly unlimited funds, I charged the customer based on an hourly rate. Since I use a vacuum desoldering tool, changing out 10-15 aluminum electrolytics on a board took me not much more time than 1-2. Most of the time spent on a board that comes out of the field is spent on cleaning, testing (before and after repairs) and prep, and it only takes a few seconds to pull the solder off of a couple of component leads. Replacing aged electrolytics wholesale on these types of boards also meant I didn't need to worry that the same board would be back on my bench again in the next 3-6 months. These days, I'm not taking on any new commercial work though, there was just too much demand due to all those shoddy far-east made capacitors, and it meant I pushed aside all my own projects. I guess from a business standpoint, if I had been trying to make extra money on boards repeat failing in the field and having to come back in for repairs over and over, changing out only 1 or 2 aluminum electrolytics would have made sense. That said, industrial process equipment tends to run 24/7 and is expected to be 100% reliable. If something shuts down, it tends to cost a heck of a lot of money, so I would no doubt have lost many customers. 100s? Where are you sourcing your components from? The typical board I rebuild has a component cost of about $20 or less. Smaller switchmode PSUs with a bunch of 10-18mm radials might be closer to $35-50. Larger PSUs /might/ cost closer to $100 if they have several large screw terminal capacitors in them. All things considered, that isn't very much money in today's dollars, and considering the full replacement cost of some of these boards (if they are even available), those preventive maintenance costs are an absolute bargain, /especially/ if you are doing the work yourself on your own time. How do you -know- they are "running perfectly"? Just because a widget itself is functioning, you have no way of knowing if that capacitor is working 100% properly /unless/ you actually remove it from circuit and run a full battery of tests on it. Simply measuring the capacitance with a DMM while a capacitor is in circuit isn't good enough. Given that a typical aluminum electrolytic capacitor costs anywhere from $0.12-$0.15 (4mm or 5mm diameter radials) to about $1.00 (12mm or 16mm diameter radial), it also doesn't make much sense to desolder a 20 year old part, spend at a minimum 5 or more minutes testing it, and then solder it back in. It it much more economical to pull the old part and install a new one and be done with it. (You also don't have to worry if the desoldering and resoldering process might have damaged the original parts end-seals.) That said, I personally pre-test new parts, in bulk, before I put them into my stock, so I know ahead of time that I'm installing known-good parts. On many occasions I've cut open old aluminum electrolytics, and the guts very much do deteriorate with age. In addition to corrosion of the foil (black spots and pitting) and foil to terminal junctions (corrosion), one thing I particularly noticed was the more operating hours an aluminum electrolytic capacitor had on it, the more its electrolyte and paper insulator tended to smell bad compared to an otherwise identical (same brand and series) part that had very low hours. These are all clear signs of deterioration. To those who advocate keeping old aluminum electrolytics in service, I have to also ask, would you also try to recondition 20 year old NiCd or SLA batteries and keep those in service too? The bottom line really is, if you want something to be as reliable as you can possibly make it, you replace old aluminum electrolytic capacitors which are outside of their expected service life. If you don't care if something fails over and over, or you actually like to have the same widget on your service bench year after year, or month after month, you just replace 1 or 2.