15 Jun
2021
15 Jun
'21
2:41 p.m.
On 6/15/21 12:16 PM, Tom Uban via cctalk wrote:
On 6/15/21 2:02 PM, Josh Dersch wrote:
The schematic should be in the user's manual for the KM11.
--
TTFN - Guy
Just to provide some real-world data, I used a
pair of KM11's to debug my 11/05, see the picture here:
http://yahozna.dyndns.org/scratch/1105-debug.jpg
<http://yahozna.dyndns.org/scratch/1105-debug.jpg>
They worked fine.? (These are clones, from Guy Sotomayor's kit.)? I can verify
tonight whether I
have the earlier or later rev CPU set, if that helps.
- Josh
Interesting! From your pic, you have the M7260 without the circular baud rate
selector switch, but I
cannot tell which M7261 board you have.
Does the machine come up and run normally with the boards in and the switches all the
disabled
positions or do you have to do a special sequence to start?
I will have to look at the schematics to see how the two slots connect to the processor
on each of
the board versions and maybe also take a look at Guy's KL11 schematic if it is on his
site. 