20 Apr
2002
20 Apr
'02
9:44 a.m.
been there, done that, kinda sucks and looks ugly. i've begun getting more
creative and started using some of the sanding and rounding features with
my dremel and made one that has dual fan and a HDD LED on it for a SCSI
drive i had sitting in a 486- though it is long gone now. 486 died and i
had decided to donate it to a friend who liked to use explosives. first
time i saw a 486 CPU fly over 20 feet =)
-John
At 01:01 AM 4/20/02, you wrote:
On Sat, 20 Apr 2002, Chad Fernandez wrote:
----------------------------------------
Founder, Lead Writer, Tech Analyst
and Web Designer Boff-Net Technologies
http://boff-net.dhs.org/index.html
---------------------------------------
Temporarily, I've got a fan sitting on top of
the cards and the power
supply. It's cooled off a lot!! I need to poke a hole in the case an
permanently install that fan.
Cheapskate's Drive Fan Recipe:
One 486-early-Pentium CPU fan w/HDD-style power input
One 5.25" drive-bay cover
4 2.5mm x 10mm woodscrews
1 Dremel Tool or Flexshaft
Cut a round hole in the bay cover, the diameter of the fan itself or
slightly smaller.
Drill mount holes to match the fan housing.
Slot the cover to accomodate the power leads - either in from the edge
or out from the fan opening.
Screw fan to cover, plug to spare power lead, clip bay cover into
place. If you're as anal as I am, grind screw points flush to the
plastic on the inside.
Much cheaper & much quieter than the commercial bay coolers. If your
PSU sucks air into the case, orient the fan to blow out, or vice versa.
Doc