19 Jan
2018
19 Jan
'18
8:44 a.m.
Hi,
On Thu, Jan 18, 2018 at 08:26:45PM -0600, Jason T via cctalk wrote:
On Thu, Jan 18, 2018 at 7:55 PM, Richard Cini
<rich.cini at verizon.net> wrote:
I think you want this: http://files.markgthomas.com/dl/adaptec/EZSCSI40.IMD
(This URL is temporary.)
I just found, imaged, and installed it, on my disk-imaging PC using
an AHA-1522A:
-------------------------------------------------------
IMD 1.18: 24/12/2017 4:54:15
Adaptec EZ-SCSI v4.01a Setup Diskette Disk 1of1 HD 3.5
Windows 95/NT/3.1x and DOS Drivers
I use this card as a floppy/disk controller in a
PC/AT that's used solely for imaging. The controller is connected to two Seagate
ST-2502N (442MB) hard drives running MS-DOS 6.22. Works like a champ. Cables are readily
available on eBay but since they're regular 50-pin IDC connectors, you can DIY if
needed -- connectors are readily available.
Do you have (and can you post) the MS-DOS drivers for that card? I
also run one in my floppy imager machine, which dual-boots btw. MS-DOS
and some later Linux. Having SCSI for at least one of the OSes would
be nice.
I could also switch the other partition over to FreeBSD, as Warner L suggested. From Windows 95 or NT Click Start, Run, Type a:\setup
From Windows 3.1 or NT 3.52 File/Run Type a:\setup
From DOS Type a:, Type dosinst
-------------------------------------------------------
Mark
--
Mark G. Thomas (Mark at Misty.com), KC3DRE