HP battery eliminator connectors - found

I've brought this up on the list a couple times, and the concensus among fellow HP'ers was always "these connectors aren't around anymore". Some are happy to just push a resistor into the 21MX battery connector, but I have one of the HP connectors built specifically as a battery eliminator plug and I wanted more. The resistors can fall out if just pushed in or not make good contact. After working with someone at AMP (Tyco), the following information is available: These are the old AMP "MR" (miniature rectangle) connectors. Here's the parts for a HP 21MX battery eliminator plug, with AMP part numbers & mouser prices: Pin housing (cap) 1-640511-0 $0.82 Strain relief (shell) 350522-1 $1.24 Live split pin contact (tin, 26-18 awg) 640545-1 $0.17 (need 2) or Live split pin contact (tin, 26-24 awg) 640579-1 (need 2) or Live split pin contact (gold, 26-18 awg) 640545-2 $0.40 (need 2) or Live split pin contact (gold, 26-24 awg) 640579-2 (need 2) These are all current production parts and still available new. The only mismatch - the HP plugs were black and these are red :) If I build up a bunch of battery eliminator plugs, I wonder if I can get $20 each on ebay ;) Hope this helps folks! Jay West