19 Feb
2010
19 Feb
'10
2:13 p.m.
On Fri, 19 Feb 2010 08:45:06 -0500, Bill Sudbrink wrote:
The last thing I did Wednesday night, two nights ago,
before I
posted the first message, was to unsolder one of the leads on
the inductor so I could put an Ohm meter on it. It was not open
and, as others have suggested it should be, was almost a dead
short. I wonder if the desolder/solder heat has "fixed" it.
That may have very well fixed it, I have found severely over heated
solder joints oxidise/chrystalize and simply reflowing the solder fixed the problem.
Back under my rock :)
The other Bob