23 Jul
2004
23 Jul
'04
12:08 p.m.
On Fri, Jul 23, 2004 at 04:16:01PM -0700, Dwight K. Elvey wrote:
A number of people slapped lables on AIM-65's. I
have
a box similar to this with a few extra boards added that
is AIM-65 based as well.
What other than the shell is non-AIM-65 ??
Me, too... mine came with a board loaded with EPROMs mounted _under_ the
AIM-65 motherboard.
Oh... a little tip - I have proven that the 6520 on the display board can
be replaced with an 6821 (I have a number of 6821s since they were used to
drive the printer port and the diagnostic display for the original COMBOARD
model).
I have more than one AIM-65 at home, but only one display board. One of my
projects is to fabricate a replica on perfboard. Mostly via eBay, I've
managed to pick up a few of the 4-char ASCII displays that are on that board.
Barring that, I was thinking about using some modern ASCII displays that I
picked up for a couple $$ each from BG Micro, and re-writing the relevant
ROM code. Obviously, direct replacement is simpler.
-ethan
--
Ethan Dicks, A-130-S Current South Pole Weather at 23-Jul-2004 24:00 Z
South Pole Station
PSC 468 Box 400 Temp -87.0 F (-66.2 C) Windchill -137.6 F (-94.2 C)
APO AP 96598 Wind 18.5 kts Grid 006 Barometer 665.5 mb (11176. ft)
Ethan.Dicks(a)amanda.spole.gov http://penguincentral.com/penguincentral.html