22 Dec
2012
22 Dec
'12
5:34 a.m.
On 22/12/2012 13:03, Rob Jarratt wrote:
A little while ago I acquired a Micro PDP 11/73. It
contains 2 DEQNA cards
and an Emulex CU02. I am not sure what the CU02 is, but think it is some
kind of disk controller, possibly SCSI, if someone knows what it is and can
point me to a manual let me know.
It's a CS02 serial controller, which IIRC is a 16-line multiplexer that
emulates a DHV11. There should be a longer number beginning CU.... or
CS.... on a 40-pin chip that'll confirm the exact type. I assume you
don't have the cables and panels for it? You'll find the manuals on
bitsavers at http://www.bitsavers.org/pdf/emulex/
A UC02 would be a disk controller. Or an SC02 or SC03; there are
several variants of these emulating various DEC systems with SMD drives,
and QD33 using MSCP for SMD drives, and QD01, QD21 for ST412/EDSI drives.
The automatic boot is setup to boot from the DEQNA
cards, however I have no
idea how to set up a boot node
Neither have I. IMO you'd be much better off with an RQDX3 and a hard
drive.
--
Pete Peter Turnbull
Network Manager
University of York