2 Feb
2018
2 Feb
'18
1:35 p.m.
Interesting. Count me in for 20'. I would want to pick up at VCF east.
These people have taps, but no transceivers.
https://www.connectorpeople.com/Connector/TYCO-AMP-TE_CONNECTIVITY/2/228752…
Has anyone found the right terminators?
On Tue, Jan 30, 2018 at 7:55 PM, systems_glitch via cctalk <
cctalk at classiccmp.org> wrote:
I believe my guy referenced that listing as his basis
for his price. I'm
sure freight would bring it up to about the same per-foot cost, if not
higher. I am sometimes out near the seller of that particular eBay listing,
so I'll send them an email and see if they're interested in a local pick-up
deal.
Thanks,
Jonathan
On Tue, Jan 30, 2018 at 7:48 PM, Glen Slick via cctalk <
cctalk at classiccmp.org> wrote:
On Tue, Jan 30, 2018 at 4:06 PM, systems_glitch
via cctalk
<cctalk at classiccmp.org> wrote:
course
Full disclosure on price: right now if I buy one
spool, it'll be
$0.60/foot
> to me, I was thinking I'd charge $1/foot for moderate lengths, of > I'm willing to make a deal on bulk
purchases, especially if it ends up
> being local pick-up (here in VA or VCF East). I haven't dressed out
cable
this
large for N connectors in a long time (last stuff was Times
Microwave
LMR400 for long-range 802.11b stuff) so I'm
not sure what the N
connectors
cost nowadays or how long it'll take me to
crimp them on.
Here's the datasheet on the stuff:
https://catalog.belden.com/techdata/EN/89880_techdata.pdf?ip=false
DEC spec, orange jacket, plenum rated.
Thanks,
Jonathan
There is also this seller with a couple of 1100 foot spools of Belden
89880 for $480 also in VA. The datasheet says 125 pounds per 1000 feet
so if you had to ship one of those I would expect that to add a fair
amount to the cost.
https://www.ebay.com/itm/291786649807