Hi Steve,
I got your message about this too. But I've been busier than a cat
covering S***! I've got a couple of working MDss but they're all covered
with other junk, er, future projects. What kind of Multibus chassis are
you looking for? I have a couple of gutted MDS-225s but I gave away the
only non-working MDS-800 chassis that I had. I also have several six slot
card cages with backplanes but no power supplies or anything else attached
to them. Will they do for what you want?
I've got two working MDS-800s sitting in my living room at the moment but
the PC that I was using for a terminal croaked and I need to set up another
one. It shouldn't take long but neither would half of the other 500
projects waiting to be done.
Joe
At 03:47 PM 6/18/04 -0700, you wrote:
Hi Steve
I've got the source someplace if Joe doesn't come up with
it before I do. Of course, I should be able to do a ROM
dump but I'll be busy with a couple things this and next
weekend.
Dwight
>From: "Steve Thatcher" <melamy(a)earthlink.net>
>>
>I have finally had time to start bringing up my Northstar Horizon system.
What
I was hoping was that someone had the hex prom code or
source for the Intel
monitor in the MDS-800. In past time, I actually had ISIS-II running on a
Northstar system and it requires a Intel style monitor program at 0f800H.
Once I
get access to my 8" disks again, I will be able to
supply modified source
that
would allow someone else to do the same thing.
best regards, Steve Thatcher