15 Aug
2015
15 Aug
'15
6:06 p.m.
On 8/14/2015 11:56 PM, tony duell wrote:
My experiment at manual centering, with the motor off, was not
successful - no better results than the normal mounting process,
possibly even a bit worse.
There is no play in the spindle at all.
Certainly not 1/2 track worth.
Can't wiggle it at all, no visible wobble, etc.
Not necessarily play. Anyway, half a track width is just over 10 thou
and I am not sure I could notice that amount of runout by eye. Also
I have learnt by bitter experience to check everything, otherwise you
discover (far too late) that the thing that was 'obviously right and
didn't need checking' was the problem