12 Jan
2006
12 Jan
'06
3:50 p.m.
On 1/12/2006 at 2:46 PM jim stephens wrote:
I don't recall the signals to name what was
missing, but there appeared
to be a lack of reaction by the drive after the first record completed.
I did not have any luck figuring it out as I didn't have
that detailed a manual for the drive at the time to use to troubleshoot.
Well, if the drive is behaving correctly, a 1 usec pulse on IGO (J1, pin
8) when IRDY (J2, pin 28) is asserted and IDBY (J2, pin 38) is un-asserted
should begin a read operation. A logic analyzer would tell the whole
story.
Cheers,
Chuck