15 Aug
2016
15 Aug
'16
7:12 a.m.
The tape drives are from a 3000 system.
I do have an original cdc 170 series console and it would be a big deal and a nice project
to get the console and the tape drives connected to dtcyber, since I lost almost any hope
to get a real cy17x or 18x.
I'll be back home tomorrow and have a detailed look at the peripheral controller.
Fortunately I do have a lot of spares.
-- Andreas
Am 12.08.2016 um 15:59 schrieb Paul Koning
<paulkoning at comcast.net>:
On Aug 11, 2016, at 10:27 PM, aswood at
t-online.de wrote:
I do have two original CDC 603 tape drives with controller, but to be honest it would be
quite a challenge to hook them to a modern system.
603? My manuals don't go back that far. What kind of drive is that, and what does
the controller connect to?
If it's a 6000 series channel interface, then that's very easy to deal with.
Channel to PCI-e interfaces have been built (out of FPGAs) and hooked up to DtCyber. If
it's some other type of channel, the same sort of answer would apply; none of those
old channels are all that complex.
paul