6 Mar
2016
6 Mar
'16
8:56 a.m.
How the heck do you copy an RX02 disk for use in simh?
I've been trying to transfer RX02 images between simh and a real PDP11
(that has only two RX02's, console, and ethernet). So far, I've only
attempted sending an RX02 image from the PDP to simh, but simh fails to
read it: "?DIR-F-Invalid directory". Even after adding 13*512 bytes to the
start for the missing track, I still get invalid directory.
My process is to COPY/DEVICE/FILES DY1:/START:0/END:330 DY0:BLOCK1.DAT,
then FTP that off the PDP, delete the file, and do the remaining two thirds
of the disk. Once all are transferred, "cat *DAT > floppy.dsk".
I can transfer RX50 images using the same recipe, though I haven't tried
sending an RX50 image created on simh back to the PDP.
For what it's worth, I'm having the same problem with Alan Baldwin's TCP/IP
disk images from http://shop-pdp.net/rthtml/tcpip.htm. simh can't read the
individual DSK images, but could read the *.PKG with the disks inside, and
from that, I could (RT-11) MOUNT each disk to a logical
device.
b
On Thu, Jan 28, 2016 at 11:50 AM, Mattis Lind <mattislind at gmail.com> wrote:
I found some 8 inch floppies with distribution kits
for MU-BASIC V2 and
RT-11 V03B. I imaged those and put them here
http://www.datormuseum.se/documentation-software/rx01-and-rx02-floppy-disks
if anyone is interested in playing with MU-BASIC. There are both RAW disk
images and to be used in SimH and like and also DMK/IMD files.
The system that floppies came with is this little (
http://www.datormuseum.se/computers/digital-equipment-corporation/pdp1103-l
)
system once used at Scania in S?dert?lje.