16 Oct
1998
16 Oct
'98
1:34 p.m.
That reminds me, does anyone have a burner that can both read & program
16-pin 256x4 PROMs?
Kai
-----Original Message-----
From: Doug Coward [mailto:dcoward@pressstart.com]
Sent: Friday, October 16, 1998 3:27 PM
To: Discussion re-collecting of classic computers
Subject: Re: PROM Burner
Joe said:
DataI/O is the lousy about supporting the older
equipment. I have a
model 29 and a 2B module. I do have instructions for the 29 but not for
the module. The 29 can be programmed from a computer by simple data
transfer via Rs-232. Or you can use the keypad to enter all the data or to
modify the data. BUT you need the instructions for the module since they
include the code numbers used to identify the various EPROMS to the
programmer. Without those codes the programmer is useless.
I can't believe all of the hammering that Data I/O
is taking on this list.
When I got my series 22 I when right to the Obsolete
Programmer Support section of Data I/Os site to get
the list of code for it. They are right there!!
http://www.dataio.com/support/obsolete.html
or their FTP site
ftp://ftp.data-io.com/dataio/
=========================================
Doug Coward
Press Start Inc.
Sunnyvale,CA
=========================================