10 Aug
1999
10 Aug
'99
8:03 a.m.
Various people said:
And so can a Macintosh if you run a terminal emulator and connect the
serial port to a Northstar Horizon. :-)
I point is that Commodore had the foresight to put a "DMA" line
on the Expansion Port so that an external device could tri-state
the address lines on the 6510, effectively removing the 6510 from
the memory map. Which makes it very easy to run the C64 with multiple
processors or just a different processor.
The C64 CP/M cartridge was set-up so that you could have 6502 code
embedded in your Z80 code. You just need to set a certain register
every time you wanted to switch processors.
That coupled with the fact that you could swap out all the ROM and
all of the I/O leaving a continue 64K ram space, makes the C64 a
hardware hacker's dream.
Just my two cents.
--Doug
===================================================
Doug Coward dcoward(a)pressstart.com (work)
Sr Software Engineer mranalog(a)home.com (home)
Press Start Inc. http://www.pressstart.com
Sunnyvale,CA
Visit the new Analog Computer Museum and History Center
at http://www.best.com/~dcoward/analog
===================================================
> > The Commodore 64 _could_ run CP/M
programs...provided one had the
> > optional Z80 cartridge...though I never tried myself. :-) The 128 was the
> > first Commodore machine to actually boot CP/M disks with a 1571 drive,
if
I
remember correctly.
Well so _could_ the PDP-8 if someone built the necessary hardware or wrote
a simulator for it :)