DS20E power supply question

I have a DS20E Alpha machine. It's pretty fully configured, with two 666 MHz CPUs, 4GB RAM and 4x10K SCSI drives. In other words, it's a real power hog. It has three power supply modules installed, and if I understand the configuration rules then at least two should be required to run the machine and the third is a hot spare. But, when do SHOW POWER at the SRM prompt, I get P00>show power Status Power Supply 0 * BAD * Power Supply 1 not present Power Supply 2 not present System Fan 0 good System Fan 1 * BAD * CPU Fans good Temperature good What? If I believe that then I have no functioning power supplies installed?!? At this point I should mention that the machine boots VMS and runs just fine. Obviously something is not telling me the truth. Does anybody know what would cause this? BTW, what do the red LEDs on the front of the power supply modules mean? Is LED ON a good thing (i.e. power OK) or a bad thing (i.e. fault)? FWIW, none of the LEDs on my three power supplies is on. Oh, and it's right about System fan #1 - one of the fans is not running. I don't know if it's seized up, or if it's related to the power supply issue. Thanks, Bob