1 Apr
2019
1 Apr
'19
6:56 p.m.
On Mon, Apr 1, 2019 at 5:55 PM Bill Gunshannon via cctalk <
cctalk at classiccmp.org> wrote:
On 3/31/19 4:29 PM, Josh Dersch wrote:
Can you elaborate as to what you're doing here (what hardware, how
you're bringing it up, etc) and what errors you're getting or what
behavior you're seeing?
OK, here we go with exactly what I get with the new kernel with
NKL = 8 and entries in /etc/dtab for 7 serial lines.
----------------
93Boot from ra(0,0,0) at 0172150
:
: ra(0,0,0)unix
Boot: bootdev=02400 bootcsr=0172150
2.11 BSD UNIX #17: Thu Jan 4 03:34:38 PST 1990
root at wizard:/usr/src/sys/WIZARD
ra0: Ver 6 mod 13
ra0: RA90 size=4110479
/netnix bad magic 407
netinit failed phys mem = 2097152
avail mem = 1879360
user mem = 307200
January 4 08:48:26 init: configure system
autoconfig: warning: more than three handlers for device tty1 on line 36.
hk ? csr 177440 vector 210 skipped: No autoconfig routines.
ht ? csr 172440 vector 224 skipped: No autoconfig routines.
ra 0 csr 172150 vector 154 vectorset attached
rl ? csr 174400 vector 160 skipped: No autoconfig routines.
tm ? csr 172520 vector 224 skipped: No autoconfig routines.
tms 0 csr 174500 vector 260 vectorset attached
ts ? csr 172520 vector 224 skipped: No autoconfig routines.
xp ? csr 176700 vector 254 skipped: No autoconfig routines.
tty1 1 csr 176500 vector 300 skipped: No autoconfig routines.
tty2 2 csr 176510 vector 310 skipped: No autoconfig routines.
tty3 3 csr 176520 vector 320 skipped: No autoconfig routines.
tty4 4 csr 176530 vector 330 skipped: No autoconfig routines.
tty5 5 csr 176540 vector 340 skipped: No autoconfig routines.
tty6 6 csr 176550 vector 350 skipped: No autoconfig routines.
tty7 7 csr 176560 vector 360 skipped: No autoconfig routines.
erase, kill ^U, intr ^C
#
checking quotas: done.
Assuming NETWORKING system ...
ifconfig: socket: Network is down
ifconfig: socket: Network is down
route: socket: Network is down
route: socket: Network is down
starting system logger
Jan 4 08:56:13 wizard syslogd: cannot create /dev/log: Network is down
checking for core dump...
preserving editor files
clearing /tmp
standard daemons: update cron accounting.
starting network daemons: inetd rwhod printer.
starting local daemons: sendmail.
Thu Jan 4 08:56:26 PST 1990
2.11 BSD UNIX (wizard) (console)
login:
----------------------------------
So, the serial line still don't work and the for some reason the
network won't come up. Looks like more research needed for this.
Based on:
"/netnix bad magic 407
netinit failed"
it looks like the networking portion of the kernel (built into /netnix) was
either not built correctly, or not installed properly. Any errors when
building netnix? Do you have a netnix in the build directory for the
kernel? Does it match the one in root?
As for the serial lines, the line "autoconfig: warning: more than three
handlers for device tty1 on line 36." sounds suspicious. I'm not entirely
sure that the output from autoconfig indicates failure here -- did you
create the device files in /dev corresponding to the serial lines?
- Josh
And now for today's humor.
During one of the recompiles of the kernel (I had to do it a
couple times to get the BASE and Overlays right. Boy did that
bring back memories. Glad to see I still have the knack for
doing them.) I got the following message:
base segment is 49152, min is 49152, too small by 0 bytes.
And, of course, it said the kernel was not BOOTABLE. Maybe that
should say "min is 49153". :-)
bill