7 Nov
2000
7 Nov
'00
3:25 p.m.
On Tue, 7 Nov 2000, Mark Green wrote:
In addition, for real time simulation digital machines of that
generation were wholly (too strong?) inadewuate to the task. In
particular, I recall reading about a '60ish project by one of Britain's
Formula One makers to use a computer to control a F1-machine driving
around an actual circuit in lieu of the driver. As I recall the story,
it did not make it beyond the second turn. However, an analogue
computer handled the task quite well. Apocryphal? ???
- don
Sounds like something Chapman might have done. Or BRM?
----- Original Message -----
From: "Mark Green" <mark(a)cs.ualberta.ca>
To: <classiccmp(a)classiccmp.org>
Sent: Tuesday, November 07, 2000 2:20 PM
Subject: Re: "Basics of Analog Computers" book
Depends. In the 1940s and 1950s they were used in both analogue
and digital computers. After the early 1960s, tubes were replaced
by transistors in digital computers (at least in North America), but
they were still used in analogue computers. In terms of pure numbers,
analogue computers greatly out numbered digital computers until some
point in the 1960s. In the simulation area, digital computers didn't
become cost effective for many applications until around 1970, particularly
those requiring real-time. So, for early computers the use of tubes
wasn't a good indication of whether the computer was analogue or
digital.
The last time I looked tubes were analogue devices. One of their
main uses is as amplifiers, which is definitely an analogue function.
If I remember correctly, one of the main problems with early tube
computers (1940s and 1950s), was actually getting the tubes to behave
like digital devices.
Point taken on the nature of tubes, but they were primarily used in
computers as bipolar devices, weren't they? The fact that a computer
contains analogue devices doesn't make it an analogue computer.
--
Dr. Mark Green mark(a)cs.ualberta.ca
McCalla Professor (780) 492-4584
Department of Computing Science (780) 492-1071 (FAX)
University of Alberta, Edmonton, Alberta, T6G 2H1, Canada