10 Apr
1999
10 Apr
'99
8:03 p.m.
Just out of curiousity, which fuse is missing?
I was rushed, so I didn't really notice the rating. It was the
middle one on the cover latch side (left side of the case as you
look at the front panel)
Another thing. I trust you have the little jumper plugs
in the 3 pin
mate-n-lock sockets on the power supply? If not, the machine won't power
up. These sockets are _not_ the same as the ones on a PDP11 power
controller. You need to short the middle pin to one end pin on one socket
and the middle pin to the other end pin on the other socket.
Aha... There is only one of those in (that I remember)...
Which one is shorted which way (or is it sufficient to have one
short one way and the other to short the other way?)
Sorry, I haven't looked at the printset yet... that's the reason
for the stupid question...
Megan Gentry
Former RT-11 Developer
+--------------------------------+-------------------------------------+
| Megan Gentry, EMT/B, PP-ASEL | Internet (work): gentry!zk3.dec.com |
| Unix Support Engineering Group | (home): mbg!world.std.com |
| Compaq Computer Corporation | addresses need '@' in place of '!' |
| 110 Spitbrook Rd. ZK03-2/T43 | URL: http://world.std.com/~mbg/ |
| Nashua, NH 03062 | "pdp-11 programmer - some assembler |
| (603) 884 1055 | required." - mbg |
+--------------------------------+-------------------------------------+